APRILIA BIKERS HELLAS
Aprilia 1000cc V-Twins: Model Years 1998-2009 (1998-2009 The Rotax Era) => ETV1000 CapoNord , RST1000 Futura => Μήνυμα ξεκίνησε από: nikoscapo στις Οκτώβριος 12, 2014, 11:25:59 μμ
-
Ξερει κανεις πως σβηνει το service που βγαινει στο καντραν.????
Μου ειχε πει μια φορα ο Bill και το ειχα σβησει αλλα δεν το θυμαμαι. :srry: :srry: :srry: :srry: :srry: :srry:
-
Re Setting the SERVICE light
1. Remove the seat.
2. On the left hand side (as you face the bars) near the battery you will find two connectors, male and female. The female connector has two grey wires and the male has a blue/green wire. Connecting these two together puts the onboard computer into diagnostic mode. Connect these together, noting their original position for later.
3. Turn on the ignition (don't start the engine).
4. On the right hand instrument panel, "EFI" will now display above the MODE button.
5. Press and hold the MODE button.
6. While still pressing the MODE button, press and hold the SET button.
7. Keep both buttons pressed until the "Service" indicator disappears (seems like a long time, 17 seconds).
8. Turn off the ignition.
9. Disconnect the diagnostic connectors and place them in their original position.
10. Turn ignition back on to verify "SERVICE" indicator is out and panel displays normally.
11. Replace seat and ride safely.
-
RST1000 Futura / ETV1000 CapoNord
Re-setting the SERVICE Light
1. Remove the seat.
2. On the left hand side (as you face the bars) near the battery you will find two connectors, male and female. The female connector has two grey wires and the male has a blue/green wire. Connecting these two together puts the onboard computer into diagnostic mode. Connect these together, noting their original position for later.
3. Turn on the ignition (don't start the engine).
4. On the right hand instrument panel, "EFI" will now display above the MODE button.
5. Press and hold the MODE button.
6. While still pressing the MODE button, press and hold the SET button.
7. Keep both buttons pressed until the "Service" indicator disappears (seems like a long time, 17 seconds).
8. Turn off the ignition.
9. Disconnect the diagnostic connectors and place them in their original position.
10. Turn ignition back on to verify "SERVICE" indicator is out and panel displays normally.
11. Replace seat and ride safely.
:bye:
:fc21: :stnd:
-
RST1000 Futura / ETV1000 CapoNord
Re-setting the SERVICE Light
1. Remove the seat.
2. On the left hand side (as you face the bars) near the battery you will find two connectors, male and female. The female connector has two grey wires and the male has a blue/green wire. Connecting these two together puts the onboard computer into diagnostic mode. Connect these together, noting their original position for later.
3. Turn on the ignition (don't start the engine).
4. On the right hand instrument panel, "EFI" will now display above the MODE button.
5. Press and hold the MODE button.
6. While still pressing the MODE button, press and hold the SET button.
7. Keep both buttons pressed until the "Service" indicator disappears (seems like a long time, 17 seconds).
8. Turn off the ignition.
9. Disconnect the diagnostic connectors and place them in their original position.
10. Turn ignition back on to verify "SERVICE" indicator is out and panel displays normally.
11. Replace seat and ride safely.
:bye:
:fc21: :stnd:
ελα...αμεσως να πεσεις να με φας, αυστηρε!! :P
...κατι δεν παει καλα με το copy-paste...μου βγαζει τα γραμματα μινιατουρες!!
-
:tez: :tez: :tez: ...Για τύφλωση!
-
:tez: :tez: :tez: ...Για τύφλωση!
:fc21: :fc21: :fc21: :fc21: :fc21: :fc21: :fc21: :fc21:
Eγω τυφλωθηκα γιατι δεν ξερω αγγλικα... :( :srry: οταν με εστελνε η μανα μου εγω πηγαινα αλλα ητανε κλειστα το φροντηστηριο...
Μολις με σταματησε μου ειπαν οτι πρεπει να πηγαινω καποια συγκεκριμενη ωρα...
εγω πηγαινα πρωτα βολτα με το παπι και πριν γυρισω σπιτι περναγα και ειχαν κλεισει.! :psdof: :psdof: :psdof: :psdof:
Καποιος εαν εχει την ευγενη καλοσυνη να μεταφραση... και ελπιζω να πηγαινε στην ωρα του αυτος στο φροντηστηριο... :P :P
-
Σήκωσε την σέλα του οδηγού αριστερα της μπαταρίας έχει 2 βυσματακια τα οποία μπορουν να κουμπώσουν μεταξύ τους. Μη νμπεις στην διαδικασία να το προσπαθήσεις απλά ένωσε τις επαφές τους με ένα συρματάκι. (πρόσεξε να κάνει καλή επαφή)
Γύρνα τον διακόπτη στην θέση ΟΝ. Πάτα το κουμπί MODE και κρατώντας το πατημένο πίεζε το κουμπι SET.
Κρατα τα 2 κουμπιά πατημένα μέχρι να σβήσει η ενδειξη SERVICE.
Γύρνα τον διακοπτη στο OFF και αποσυνδεσε το καλωδιο που ενώνει τις επαφές.
Γύρνα τον διακοπτη στο ΟΝ για να βεβαιωθείς ότι όντως έχει σβήσει η ενδειξη.
:bye: :bye:
-
Σήκωσε την σέλα του οδηγού αριστερα της μπαταρίας έχει 2 βυσματακια τα οποία μπορουν να κουμπώσουν μεταξύ τους. Μη νμπεις στην διαδικασία να το προσπαθήσεις απλά ένωσε τις επαφές τους με ένα συρματάκι. (πρόσεξε να κάνει καλή επαφή)
Γύρνα τον διακόπτη στην θέση ΟΝ. Πάτα το κουμπί MODE και κρατώντας το πατημένο πίεζε το κουμπι SET.
Κρατα τα 2 κουμπιά πατημένα μέχρι να σβήσει η ενδειξη SERVICE.
Γύρνα τον διακοπτη στο OFF και αποσυνδεσε το καλωδιο που ενώνει τις επαφές.
Γύρνα τον διακοπτη στο ΟΝ για να βεβαιωθείς ότι όντως έχει σβήσει η ενδειξη.
:bye: :bye:
στην περιπτωση που κανεις ολα τα παραπανω και δεν σου αναψει τιποτα, (σβησει το καντραν) μην μασησεις βγαλε το πολο της μπαταριας και ξαναβαλτο και εισαι οκ
-
Εχε και κανα 2 πυροσβεστηρες πλαι σου εεε??... :tez: :tez: :P
-
Εχε και κανα 2 πυροσβεστηρες πλαι σου εεε??... :tez: :tez: :P
Θα φοραω και το κρανος.!!!! :tez: :tez: :tez: :tez:
Ευχαριστω παρα πολυ boys (πως το μιλαω το αγγλικο ο Φουστης.!!!)
-
?